If you’re searching for garage floor coatings in Johnstown, you’re likely wondering what makes one system better than another—and if it’s really worth doing at all. As a small, family-run business based right here in Johnstown, we’ve had these conversations with dozens of local homeowners. So, we’ve rounded up the five most common questions we get and answered them below.
1. How does epoxy compare to polyaspartic coatings?
Great question—and one we hear all the time! While most people call it “epoxy,” what we actually install is a polyaspartic floor coating system, which outperforms epoxy in several key areas: faster cure times, better UV resistance, and stronger durability.
That said, epoxy is still a valid product. It’s thicker and dries harder—but that rigidity also makes it more prone to cracking or chipping when your concrete moves. And in a place like Johnstown where freeze/thaw cycles and settling are a fact of life, that matters.
We stick with polyaspartic because it’s more flexible, allowing it to move with the concrete. It holds up better to heat, chemicals, UV exposure, and heavy traffic—making it a smart long-term investment for your garage or basement.
2. Can these coatings handle Colorado’s crazy weather?
Absolutely. Our polyaspartic floors are engineered for the Colorado climate. Whether you’re dealing with blizzards, hailstorms, or blazing sunshine, these coatings hold strong.
They’re non-porous and waterproof, so they won’t absorb moisture like bare concrete. They also resist chemical damage from magnesium chloride, the common de-icer used around Johnstown in the winter. Long story short: your floor stays protected, no matter the season.
3. How long does it take to install a garage floor coating?
Our standard garage installs take two days from start to finish. Day one includes grinding and prepping the concrete, patching any damage, applying the basecoat, and broadcasting the decorative flake. Day two is all about sanding, cleaning, and applying the protective topcoat.
We never rush the process. Some companies advertise one-day installs, but we’ve seen the long-term problems that can cause. We allow each layer to cure fully so you get strong adhesion, better durability, and a finish that lasts.
4. How easy is it to clean and maintain?
Super easy. Every day, you’ll just want to pick up larger debris—especially sharp objects like screws or nails—and wipe up any spills. Think of it like any other hard flooring surface in your home.
For a deeper clean, a quick mop with a mild or pH-neutral cleaner (like Simple Green) works great. You can also power wash the floor—just use a wide-angle tip, low pressure, and avoid spraying too close to the surface.
And because the floor is sealed and non-porous, it won’t trap grime or stain like raw concrete. When installed properly, it’s much easier to keep clean and looking great.
5. Is it slippery?
All of our garage floors include a full broadcast of decorative flake, which not only gives it color and texture but also provides built-in traction.
While any surface can be slippery when wet, polyaspartic floors are anti-slip by design. And if you’re coating a workshop, commercial space, or area that stays damp, we can add a traction additive to the topcoat for even more grip.
Looking for Garage Floor Coatings in Johnstown?
You’re in the right place—and we’re right down the road. Let our family help yours protect and enhance your concrete with a floor that’s as tough as it is beautiful. Contact us today to get started!